Description
Capacitor kit for the crossover filters in the following Bang & Olufsen models:
Beolab Penta Type 662x, 663x
Beovox Penta Some versions – read on
This kit contains new, factory fresh high quality components for all the electrolytic capacitors in the crossover filters.
The capacitors contained in this kit were chosen specifically to provide a sound reproduction as close to that of the original speakers as possible.
The capacitors are correct types and specs, and all are 100V / 105degC types for long lifespan and superb performance even under heavy loads.
Component location charts can be downloaded in pdf-format using link(s) provided in the order confirmation email.
One kit covers a pair of speakers.
Notes:
Several different crossover versions are found in the Penta models.
Generally this kit will fit boards with markings 8006027F & 8006028F.
These board types can have either axial (“lying down”, one lead out each end) or radial (“standing up´, both leads out same end”) types of capacitors fitted.
This kit will fit both versions, because the kit contains axial capacitors and the boards carrying the radial capacitors were produced to accept both radial and axial types.
Note:
This kit will NOT fit boards with markings 8006021E & 8006026E (early Penta MkI boards, for these please use CK-087).
If in doubt – ask!
Because this kit fits several versions of crossovers, it may contain a few components that will not be used in your version.
(The photo doesn’t necessarily show the filter from the actual model(s) or the actual components in the kit).
Note:
An amount of high quality solder is needed for this job. Go here to find it.
CK-004
