Description
Set of 8 pcs. new anti-vibration rubber suspension bushings for the following Bang & Olufsen models:
Beocenter 5000
Beocenter 7000
Beocenter 7002
Beocenter 7007
Beocenter 7700
Beocenter 8500
Beocenter 9000
Beocenter 9500
Beomaster 2000 (Type 29xx only)
Beomaster 3000 (Type 29xx only)
Beomaster 3300
Beomaster 3500
Beomaster 4500
Beomaster 5000 (Type 23xx only)
Beomaster 5500
Beomaster 6000 (for transformer OT2)
Beomaster 6500
Beomaster 7000
In the above mentioned models, the transformer is held by four screws with each two rubber bushings, one bushing on top of the transformer and one below for each screw.
The original fastener bushings are known to dry out, harden and become brittle. As such they will no longer isolate vibrations
from the transformer, which will transfer to the units chassis and cabinet.
This often causes the unit to produce an annoying humming sound, audible directly from the units cabinet and in severe cases also from the shelf or furniture on which the unit is placed.
For Beomaster 5000, 5500, 6500 and 7000 this can even be observed while the unit is in standby mode.
These are direct replacements for original Bang & Olufsen part# 2938154
One set contains 8 pcs. as shown.
Note: When mounting it’s adviseable to add a little Locktite or similar thread-locking product to the outer 4-5mm of the screws threaded ends. It is also adviceable to tighten the screws only until deformation of the rubber bushings is observed.
RP-007
